Відео

If in West Central Missouri come see us in Higginsville, MO we have the 1825E Synchro Shuttle in stock. If outside our area visit your local dealer and they can help you get one too.

SynchroShuttles are great choice. We sell lots of them at our dealership. Current have 1825E, 1835E & 1840E all in Synchroshuttle.

They are Arm Rests. It you need assistance there are grab handles on the fender designed to use to assist getting on/off tractor. Another accessory that helps getting on/off tractor is the RetailREMS Grab Handle: ua-cam.com/video/V9Kqj930bdc/v-deo.htmlsi=xX-2ppDcfXrnMK4f

All NEW tractors above 25 engine HP are going to have engine controllers. You would need to look at GC Series or 1526 to find a tractor without engine controller. We have had very little issues with Engine Controllers on the Massey Ferguson Tractors we have sold. Great thing with electronic engine controllers is they can reduce fuel consumption as they only use the amount of fuel you need for the task and injected at the exact right time to provide better power and performance.

Hoses are not rotten on this tractor. It was presold when the video was taken and customer has had zero issues with the hoses on this tractor.

120 PTO HP is recommended for the RB4180V Round Baler when making 4'x6'. 1000PTO for 4'x5' Silage Bales with Cutter and max travel speed.

1842S should be global balers but not sure what they are selling to India. Check with your local dealer or Massey Ferguson India. We are a dealer in North America.

Mid PTO is an Optional add on and 72" Mid Mower is Optional for 1835M & 1840M Models.

John Deere 4075R says 60 PTO HP on their website. RhinoAG 4125 Minimum HP requirement is 60 PTO HP. So your right at the borderline for what this machines. Horsepower is normal rated on flat dry, firm ground. Personally like to see more than bare minimum HP to run the machine then have enough for tractor to pull up hills. I would probably look at the TS10 or TS12 and have plenty of HP to adequately run the machine then plenty for the tractor too.

Those are both great models of Massey Ferguson. Thanks for the comments.

75 PTO HP or 75 Engine HP? Or tell me which model and I can research to tell you which models of cutters you can operate

The 4075R john deere.

John Deere 4075R says 60 PTO HP on their website. RhinoAG 4125 Minimum HP requirement is 60 PTO HP. So your right at the borderline for what this machines. Horsepower is normal rated on flat dry, firm ground. Personally like to see more than bare minimum HP to run the machine then have enough for tractor to pull up hills. I would probably look at the TS10 or TS12 and have plenty of HP to adequately run the machine then plenty for the tractor too.

These are beast of a Cutter and been very good for us.

We are not a Woods Dealer so have no information on their Quick Hitches. But most Cat 1 Quick Hitches will not work with cross drilled hitch balls. Cat 2 Quick Hitch will we sell from Worksaver.

[Translate: Where can I buy engine parts] We are a Massey Ferguson Dealer. You would need to contact a Mahindra Dealer for Parts.

2015 the 5700SL was the First Generation and then replaced in 2018 by the 5700S. Easiest was to tell is the Hood Decal. Side Decal has Big "S" Model Number at Front of Decal versus Below the Massey Ferguson Name. And New Bold Transmission Type Decal. Depends on the Package the original 5700SL Classic Package was 540/540 Economy as base equipment Deluxe was 540.540 Economy/1000. It could be optioned either way when dealer ordered.

If you need more Horsepower the 2607H is 74 Engine versus the 1835M which is 35 engine HP. Mainly depends on equipment and how you are using the tractor and your needs. Both are great models for us.

That me. Our Family Business took off and needed my full time attention. We have several videos on the 2860 models need to go check them out they will help get more out of your investment!

On Road and Off Road Fuel is the same EXCEPT Off Road is dyed red for NO Road Taxes. Save your money use Off Road Fuel and Pay No taxes.

What is to Weak? We personally own one on our Massey Ferguson 1526 and have not seen that, Have your seen our recent video on the ESCG-48S where we put it to work picking up limbs on our acreage: ua-cam.com/video/_FeHgq9UER0/v-deo.html

I personally have not done this but I would kill the grass with round-up or similar product and then any blade designed will scrap the dead grass and leave bare soil. Personally a Grading scraper or Box Blade can help collect the residue to remove it and help level. But a Grader Blade can cut the grass off too.

Massey Ferguson 4608 has 63.5 PTO HP. DM287 needs 60 PTO HP but 9' 3" of bar can create side draft and Horsepower limits if you have contours. I would recommend the DM246 Farmer (7' 11" Cut) since it only needs 50 PTO HP which allows for extra HP for contours. Probably mow faster speed with DM246 versus DM287 with a 4608 Tractor.

Massey Ferguson 4608 has 63.5 PTO HP. DM287 needs 60 PTO HP but 9' 3" of bar can create side draft and Horsepower limits if you have contours. I would recommend the DM246 Farmer (7' 11" Cut) since it only needs 50 PTO HP which allows for extra HP for contours. Probably mow faster speed with DM246 versus DM287 with a 4608 Tractor.

Thanks for watching and commenting. There are lots of differences in Cutters and understanding what you need to look for will help you find the best for your needs.

Since 3 Point Hitch Systems do not have down pressure the implements like box blades follow the ground contours and can float up if riding over a ridge. That is why Weight is very important in selecting the right 3 Point Implements...too light and they will just bounce and do no work. You have to match the implements to the tractor to get the best performance of both items.

First Question is What kind of Net Wrap you are using there is a wide variety of qualities of Net Wrap and it makes a huge difference is reliability of the Net System. IF you only have 10 bales and having concern, best thing is to contact your local dealer you purchased from and have them come take a look.

I'm buying net from the store I got the baler from, everyone keeps saying junk net wrap so your probably right. Thank you!

@VahrenbergImplement I have agco professional, but i do remember having this problem before and switching net wrap fixed it

We have the best success with the AGCO Parts Advanced MAX Net Wrap. ua-cam.com/video/R1fSWpJTJz0/v-deo.html

Rasspe has been building knotters for 190 years and like many companies continually improves product to increase performance & reliability. AGCO has been using the Rasspe knotter for International Market Balers and all 1842 (16" x 18") and 1844S (3 String) Balers. Availability and Reliability where key reasons to use the Rasspe Knotter for the 1842S.

And having Consistent, Shape, Size and Density bales will make any Accumulator work better. Thanks to the Accumulator Manufacturers they help sell more Massey Ferguson HESSTON inline Square Balers.

Operator Manual states 50 PTO HP Minimum (Normally based on Flat Dry Ground). Our Marketing Materials Recommend 80 PTO HP.

Cat 3 Hitch but comes with Cat 2 & Cat 3 Balls. Can do both.

Glad it helped! Thanks for the comments and thanks for watching.

Did you use the Permatran 821 PLUS Fluid? CVT requires PLUS which is heavier weight base oil than Hydraulics uses. If it worked fine before then you changed fluids...I would question the fluid.

Pricing Varies by Location and Programs & Promotions from Month to Month. For Pricing you need to contact your local dealer to get the most Current Prices and Promotions. Plus you can discuss the features and options you need and get those included in pricing. If in West Central Missouri come visit us at Vahrenberg Implement or Check the Massey Ferguson Dealer Locator www.masseyferguson.com/en_us.html#dealer-locator

There is Throttle Cable that goes from Throttle Lever/Handle to the Injection Pump that controls fuel flow and engine speed. I would look at Cable and linkage to the Throttle Lever and Attachment to Engine. It's mechanical auto throttle so it can be in that area too.

@@VahrenbergImplement thank you. This helped me resolve the issue!

Glad we could be of assistance . Enjoy your Massey Ferguson.

Check the safety switches and that you are in Neutral and PTO Off and these switches are functioning properly. Could be Switch, Wiring or Starter Switch or even starter or starter solenoid causing concern.

Thank You...the 2600H series are very nice, heavy built tractors. Lots of Steel & Cast Iron compared to the competition.

They have not made any changes to the GC1725M Models. Model Change effects resale value more than year model.

@@VahrenbergImplement Thanks!

LOL...don't get your phone or keyboard wet. LOL Massey Ferguson makes it easy to own one then you can drool on the tractor. LOL

Range Shift should only be shifted when stopped. You select the range then apply the forward/reverse pedal.

Here is Specs we have compiled : Max Height 94.3", Lift Capacity at Pivot Pin at Max Height: 1450#, at 59" Lift Height: 1437#, at Ground Level: 2288#. Lift Capacity measured 19.6" Forward of Pivot Pin (Front Edge of Bucket) at Max Height: 1047# at 59" Lift Height: 1109# at Ground Level: 1670#

Must Meet Massey Ferguson Spec M-1145 for Permatran 821XL. Your local dealer should have it in stock and can ship it to you.

We have them in stock at Our Dealership for $85.00 Each that includes freight to West Central Missouri. If outside our area check with www.retailREMS.com they can ship direct to you

Depends on Tractor and Implement your trying to raise/lower.

@@VahrenbergImplement I noticed without any hooked up it will drop incrementally, i guess I just never paid attention to the brush hog hooks up high and like at 6 or 7 it’s bottomed out. Where if I had something different I might get lower without bottoming out. Also noticed with no weight it lifts up incrementally. So maybe it’s just a weight thing. This is my first implement so might just be me

What model of tractor?

@@VahrenbergImplement 2023 Kioti Ck2620

We sell Massey Ferguson so not sure how Kioti system works. Best thing I can recommend is to talk to your Kioti Dealer they the best resource for help. It doesn't sound right if it has position control 3-Point Hitch.

Glad it was helpful! Thanks for the comments and thanks for watching!